Chemical Resistant Gloves
Chemical Resistant Gloves
Gloves designed to resist a wide range of chemicals; available in butyl, neoprene, nitrile, PVC, natural rubber, fluoroelastomer, and specialty formulations, lined/unlined, smooth/textured finish; ambidextrous, available in variety of sizes and thicknesses. Regulatory compliance details can be obtained at the individual product level.
The U.S. Occupational Health and Safety Administration (OSHA) standards for personal protective equipment (PPE) address the need for chemical protective safety gloves. PPE is required when hands are exposed to possible skin absorption of harmful substances or chemical or thermal burns.
The OSHA standard also mandates an assessment of chemical exposure and the choice of appropriate gloves based on:
- Dexterity demands
- Length of exposure
- Chemical concentration, temperature, and combinations
- Simultaneous hazards
What Are Chemical Resistant Gloves Used for?
Use chemical resistant gloves for work in chemical plants, transportation, chemical processing, petrochemical and oil refining, de-greasing, solvents, hazardous liquids, and janitorial and maintenance work.
Chemical resistant glove materials and possible applications include:
- Butyl ‒ high-permeation resistance to gas and water vapors; use with esters and ketones
- Neoprene ‒ excellent tensile strength and heat resistance; compatible with some acids and caustics; moderate abrasion resistance
- Nitrile ‒ chemical and abrasion resistance; for general-duty gloves; protects against oils, greases, petroleum products, some acids, and caustics
- PVC (polyvinyl chloride) ‒ resists most acids, fats, petroleum hydrocarbons; abrasion resistant
- PVA™ material (polyvinyl alcohol) ‒ water-soluble; gas-impermeable; resists aromatic and chlorinated solvents
- Viton™ material ‒ resists chlorinated and aromatic solvents; flexible; minimally resists cuts or abrasions
What Are the Best Chemical Resistant Gloves?
No single glove meets the PPE needs for all chemical exposures. Use the manufacturer’s test results to help select the right gloves and check ratings.
Some chemical resistant gloves come lined with cotton for comfort and have other special features. In addition to hand protection, eye protection is important as well. Make sure your facility is equipped with chemical splash goggles, faceshields, eye protection safety signage, and other PPE.
- (68)
- (9)
- (1)
- (44)
- (1)
- (5)
- (2)
- (10)
- (12)
- (1)
- (2)
- (53)
- (20)
- (2)
- (67)
- (14)
- (2)
- (71)
- (8)
- (2)
- (6)
- (4)
- (5)
- (5)
- (1)
- (4)
- (61)
- (61)
- (5)
- (39)
- (125)
- (6)
- (8)
- (2)
- (13)
- (17)
- (11)
- (8)
- (1)
- (5)
- (1)
- (8)
- (4)
- (4)
- (18)
- (19)
- (25)
- (1)
- (9)
- (13)
- (5)
- (2)
- (9)
- (26)
- (21)
- (15)
- (4)
- (6)
- (9)
- (5)
- (5)
- (6)
- (2)
- (2)
- (1)
- (20)
- (4)
- (1)
- (5)
- (5)
- (4)
- (1)
- (5)
- (4)
- (3)
- (4)
- (5)
- (6)
- (9)
- (3)
- (1)
- (6)
- (8)
- (18)
- (39)
- (3)
- (128)
- (6)
- (2)
- (1)
- (15)
- (8)
- (4)
- (13)
- (3)
- (4)
- (1)
- (5)
- (4)
- (4)
- (17)
- (1)
- (13)
- (4)
- (39)
- (131)
- (1)
- (5)
- (1)
- (5)
- (4)
- (1)
- (1)
Filtered Search Results
Ansell™ ChemTek™ 38-520 Series Butyl Polymer Immersion Gloves
Provides the best resistance to the most aggressive chemicals without compromising dexterity or comfort. ChemTekTM gloves are surprisingly flexible and provide excellent dexterity.
Laboratory/Cleanroom Use | Yes |
---|---|
Inspected for Medical Use | Yes |
Packaging Type | Individually wrapped bags with insert |
Coating Material | Butyl Polymer |
Quantity | 1 Pair |
Resistant To | Highly chemical resistance |
Cuff Material | Butyl |
Hem Color | Black |
Glove Cuff Color | Black |
Series | 38-520 |
Product Type | Immersion Gloves |
Back Material | Butyl |
Thickness (English) | 20 mil |
Style | 38-520 |
Latex Free | Yes |
Glove Cuff Style | Beaded/Rolled |
Thickness (Metric) | 0.3 mm |
---|---|
Length (Metric) | 300 mm |
Coating Material | Viton/Butyl Polymer |
Color | Black |
Length (English) | 12 in. |
Latex Free | Yes |
Material | Butyl Polymer |
Exterior Finish | Smooth |
Cut Style | Beaded |
Ansell AlphaTec™ 38-560 Chemical Resistant Butyl Gloves - Gauntlet Cuff
Gloves are constructed of a thick butyl material to provide a high level of chemical resistance against agressive chemicals, without sacrificing comfort or dexterity.
Series | 38-560 |
---|---|
EN ISO 374-1 | Type A |
Certifications/Compliance (Europe) | EN 420:2003 + A1:2009, REACH Compliant |
EN ISO 374-1 CHEMICAL LETTER CODES | ABIKPT |
EN ISO 374 - 5 | Yes |
EN388 Standard | 1020X |
Color | Black |
Resistant To | Solvents, and Strong Acids |
Material | Butyl Polymer |
Glove Cuff Style | Gauntlet |
Ansell TouchNTuff™ 92-600 Disposable Chemical Resistant Nitrile Gloves
Soft nitrile disposable gloves provide high levels of comfort and splash resistance against hazardous chemicals.
Disposable | Single-use |
---|---|
Chlorinated | No |
Length (Metric) | 24 cm |
EN 421 | No |
Finger Thickness (English) | 5.5 mil |
Color | Green |
Length (English) | 9.5 in. |
Material | Nitrile |
Hand | Ambidextrous |
Finger Thickness (Metric) | 0.14 mm |
Thickness (Metric) | 0.14 mm |
Series | TouchNTuff™ 92-600 |
EN ISO 374-1 | Type B |
Certifications/Compliance (Europe) | Category III, EN 420:2003 + A1:2009 |
EN ISO 374-1 CHEMICAL LETTER CODES | JKPT |
EN ISO 374 - 5 | Bacteria, Fungi WITH Virus Protection |
Thickness (English) | 5.5 mil |
Palm Thickness (English) | 4.7 mil |
Latex Free | Yes |
Lining | Unlined |
Certifications/Compliance | ASTM D6319,FDA 21 CFR 177.2600,ASTM F1671 |
Manufacturing/QMS Audit Standards | ISO 9001 |
Glove Cuff Style | Beaded/Rolled |
Palm Thickness (Metric) | 0.12 mm |
Ansell™ NeoTouch™ 25-101 Series Bright Green Neoprene Gloves
With a latex-free formulation, NeoTouch™ gloves are appropriate for the prevention of Type I allergies. Because they’re powder-free, they also limit the risk of dermatitis for the wearer. They provide excellent resistance to acids, bases and alcohols.
Thickness (Metric) | 0.13 mm |
---|---|
Series | 25-101 |
Product Type | Gloves |
Color | Green |
Style | 25-101 |
Resistant To | Acids, bases and alcohols |
Material | Neoprene |
Liner Material | Polymer |
Glove Cuff Style | Beaded/Rolled |
Ansell MICROFLEX™ NeoTouch™ 25-201 Neoprene Gloves
Neoprene gloves with an extended cuff offers expanded chemical splash protection over the wrist and forearm.
Length (Metric) | 29 cm |
---|---|
Applications | Laboratory |
Finger Thickness (English) | 6.3 mil |
Color | Green |
Length (English) | 11.5 in. |
Material | Neoprene |
Powdered | Powder Free |
Finger Thickness (Metric) | 0.16 mm |
Thickness (Metric) | 0.16 mm |
Series | MICROFLEX™ NeoTouch™ 25-201 |
Certifications/Compliance (Europe) | EN 374-1:2016, EN 374-5:2016, EN 420:2003 + A1:2009 |
Thickness (English) | 6.3 mil |
Palm Thickness (English) | 5.1 mil |
Exterior Finish | Partially Textured |
Certifications/Compliance | ASTM D6977,FDA 21 CFR 177-2600 |
AQL | 1.5 |
Palm Thickness (Metric) | 0.13 mm |
Ansell AlphaTec™ 38-514 Chemical Resistant Butyl Gloves
Thin butyl glove provides resistance to aggressive chemicals including solvents and strong acids.
Grip Design | Rough |
---|---|
Length (Metric) | 35.5 cm |
EN388 Standard | EN 388:1000X, EN 388:1000 |
Color | Black |
Length (English) | 14 in. |
Material | Butyl |
Thickness (Metric) | 0.35 mm |
EN ISO 374-1 | Type A |
ANSI Abrasion Rating | ANSI 3 |
Certifications/Compliance (Europe) | CE 0493, EN 1149, EN 16350, EN 420:2003 + A1:2009; Category III |
EN ISO 374-1 CHEMICAL LETTER CODES | ABCIKMPST |
EN ISO 374 - 5 | Bacteria, Fungi only |
Thickness (English) | 14 mil |
Latex Free | Yes |
Lining | Unlined |
Glove Cuff Style | Beaded |
Ansell AlphaTec™ 02-100 Chemical Resistant, 5 Layer Laminated Gloves
Laminated gloves provide extreme resistance against a wide range of chemicals, including biological hazards.
Thickness (Metric) | 0.06 mm |
---|---|
Series | AlphaTec™ 02-100 |
Grip Design | Smooth |
EN ISO 374-1 | Type A |
Certifications/Compliance (Europe) | CE 0493, EN420:2003 + A1:2009; Category lll |
EN ISO 374-1 CHEMICAL LETTER CODES | ABCEFGHIMS |
Length (Metric) | 38 cm |
EN ISO 374 - 5 | Bacteria, Fungi WITH Virus Protection |
EN388 Standard | EN 388:0000 |
Thickness (English) | 2.5 mil |
Length (English) | 15 in. |
Lining | Unlined |
Material | Laminated Film |
Ansell™ Solvex™ 37-675 Series Green Nitrile Immersion Gloves
Designed to deliver optimal results in wet or dry work environments where chemical resistance is crucial. Fully reusable, with an unequaled abrasion resistance, it provides superb comfort for the wearer.
Thickness (Metric) | 0.38 mm |
---|---|
Liner Material | Flocked |
Glove Cuff Style | Gauntlet |
Ansell™ VersaTouch™ 37-501 Series Blue Nitrile Immersion Gloves
Resists many solvents and oil based chemicals. Ansell™ VersaTouch™ 37-501 Series Blue Nitrile Immersion Gloves have good abrasion resistance.
Thickness (Metric) | 0.42 mm |
---|---|
Series | 37-501 |
Glove Cuff Style | Gauntlet |
Ansell™ DermaShield™ 73-711 Series Green Neoprene Gloves
SureTRACE
Supports traceability with guaranteed access to certificates and proactive change notifications.
Learn More
Supports traceability with guaranteed access to certificates and proactive change notifications.
Learn More
Most technically advanced sterile glove available today. Free of latex proteins and accelerators, it minimizes both Type I and Type IV allergies associated with natural rubber.
Thickness (Metric) | 0.175 mm |
---|---|
Series | 73-711 |
Color | Green |
Quantity | 200/CS |
Resistant To | Chemical resistance |
Material | Neoprene |
Powdered | Powder Free |
Glove Cuff Style | Beaded/Rolled |
Sterility | Sterile |
Ansell AlphaTec™ 87-063 Heavy Duty Chemical-Resistant Latex Gloves with Raised Diamond Grip
Gloves feature a 100% cotton flock lining for comfort, and an extended cuff for additional protection. Raised diamond grip pattern enhances grip capabilities in wet or dry conditions.
Thickness (Metric) | 0.75 mm |
---|---|
Series | 87-063 |
EN ISO 374-1 | Type A |
Certifications/Compliance (Europe) | CE 0493, EN 420:2003 + A1:2009 |
EN ISO 374-1 CHEMICAL LETTER CODES | AKLNPT |
EN ISO 374 - 5 | Yes |
EN388 Standard | 3110A |
Thickness (English) | 30 mil |
Color | Yellow |
Material | Latex |
Exterior Finish | Fully Textured |
Liner Material | 100% Cotton |
Glove Cuff Style | Beaded |
Thickness (Metric) | 0.75 mm |
---|---|
Series | 87-950 |
Product Type | Immersion Gloves |
Coating Material | Natural Rubber Latex |
Back Material | Rubber Latex |
Style | 87-950 |
Resistant To | Many ketones, salts, detergents, alcohols, alkalis and fats |
Certifications/Compliance | EN388: 2003, EN374:2003, EN388:2016, EN ISO 374-1:2016, EN ISO 374-5:2016 |
Liner Material | Cotton Flocking |
Cuff Material | Natural Rubber Latex |
Glove Cuff Style | Straight |
Ansell AlphaTec™ 87-118 Extra Heavyweight Latex Gloves with Flocked Lining
Latex gloves are flexible and provide resistance to water-based chemicals. The extended cuff length prevents droplets from traveling beyond the glove and onto the skin.
Length (Metric) | 320 mm |
---|---|
EN388 Standard | 3121A |
Color | Black |
Length (English) | 12 in. |
Resistant To | Water Based Chemicals |
Material | Latex |
Gender | Unisex |
Thickness (Metric) | 0.8 mm |
EN ISO 374-1 | Type A |
Certifications/Compliance (Europe) | CE 0493, EN 420:2003 + A1:2009 |
EN ISO 374-1 CHEMICAL LETTER CODES | AKL |
EN ISO 374 - 5 | Yes |
Thickness (English) | 31 mil |
Latex Free | No |
Lining | Lined |
Liner Material | 100% Cotton |
Glove Cuff Style | Beaded |
Ansell™ Scorpio™ 19-024 Series Black Neoprene Immersion Gloves
Combine the flexibility and chemical resistance of neoprene with the comfort and heat resistance of a soft thermal liner. Provides protection from intermittent contact with hot surfaces up to 180°C.
Series | 19-024 |
---|---|
Glove Cuff Style | Gauntlet |